88
GS716T and GS724T Gigabit Smart Switches
LACP Port Configuration
To display the LACP Port Configuration page, click
Switching
LAG
Advanced
LACP
Port Configuration
.
To configure LACP port priority settings:
1.
Select the check box next to the port to configure. You can select multiple ports to apply
the same setting to all selected ports.
Note:
You cannot select ports that are not participating in a LAG
2.
Configure the
LACP Priority
value for the selected port. The field range is 0–255. The
default value is 128.
3.
Configure the administrative LACP
Timeout
value.
•
Long
. Specifies a long timeout value.
•
Short
. Specifies a short timeout value.
4.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5.
If you make any changes to this page, click
Apply
to send the updated configuration to the
switch. Configuration changes take effect immediately.
