254
GS716T and GS724T Gigabit Smart Switches
To reboot the switch:
1.
Select the check box on the page.
2.
Click
Apply
to reset the switch immediately, or click
Cancel
to abandon the reset request.
After the switch reset begins, the management interface is not available until the switch
completes the boot cycle. After the switch resets, the login screen appears.
Factory Default
Use the Factory Default page to reset the system configuration to the factory default values.
Note:
If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory
defaults, see
Connecting the Switch to the Network
on page
11.
To access the Factory Defaults page, click
Maintenance
Reset
Factory Default
.
To reset the switch to the factory default settings:
1.
Select the check box on the page.
2.
Click
Apply
, or click
Cancel
to abandon the changes. The switch resets immediately.
