225
GS716T and GS724T Gigabit Smart Switches
•
Source L4 Port
: Specify a packet's source layer 4 port as a match condition for the
selected IPv6 ACL rule. Source port information is optional. Source port information
can be specified in two ways:
•
Select keyword “other” from the drop-down menu and specify the number of the
port in the range from 0 to 65535.
•
Select one of the keyword from the list: DOMAIN, ECHO, FTP, FTPDATA, HTTP,
SMTP, SNMP, TELNET, TFTP, and WWW. Each of these values translates into its
equivalent port number, which is used as both the start and end of the port range.
•
Destination Prefix/Prefix Length
: Enter up to 128-bit prefix combined with prefix
length to be compared to a packet's destination IP Address as a match criteria for the
selected IPv6 ACL rule. Prefix length can be in the range (0 to 128).
•
Destination L4 Port
: Specify a packet's destination layer 4 port as a match condition
for the selected IPv6 ACL rule. Destination port information is optional. Destination
port information can be specified in two ways:
•
Select keyword “other” from the drop-down menu and specify the number of the
port in the range from 0 to 65535.
•
Select one of the keyword from the list: DOMAIN, ECHO, FTP, FTPDATA, HTTP,
SMTP, SNMP, TELNET, TFTP, and WWW. Each of these values translates into its
equivalent port number, which is used as both the start and end of the port range.
3.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4.
To add the new rule to the ACL, click
Apply
.
5.
To delete a rule from an ACL, select the check box associated with the rule and click
Delete
.
