100
GS716T and GS724T Gigabit Smart Switches
STP Switch Configuration
The Spanning Tree Switch Configuration/Status page contains fields for enabling STP on the
switch.
To display the Spanning Tree Switch Configuration/Status page, click
Switching > STP >
Basic
STP Configuration
.
To configure STP settings on the switch:
1.
From the
Spanning Tree State
field, specify whether to enable or disable Spanning
Tree operation on the switch.
2.
From the
STP Operation Mode
field, Specifies the Force Protocol Version parameter for the
switch. Options are:
•
STP (Spanning Tree Protocol): IEEE 802.1D
•
RSTP (Rapid Spanning Tree Protocol): IEEE 802.1w
•
MSTP (Multiple Spanning Tree Protocol): IEEE 802.1s
3.
Specify the configuration name and revision level.
•
Configuration Name
. Name used to identify the configuration currently being used. It
may be up to 32 alphanumeric characters.
•
Configuration Revision Level
. Number used to identify the configuration currently
being used. The values allowed are between 0 and 65535. The default value is 0.
