262
GS716T and GS724T Gigabit Smart Switches
To configure Dual Image settings:
1.
Select the image to configure.
The
Current-active
field displays the name of the active image.
2.
To configure a descriptive name for the selected software image, type the name in the
Image Description
field.
3.
To set the selected image as the active image, select the
Active Image
check box.
Note:
After activating an image, you must perform a system reset of the
switch in order to run the new code.
4.
To remove the selected image from permanent storage on the switch, select the
Delete
Image
check box. You cannot delete the active image.
5.
Click
Cancel
to cancel the operation on the screen and reset the data on the screen to the
latest value of the switch.
6.
Click
Apply
to apply the settings to the switch.
