148
GS716T and GS724T Gigabit Smart Switches
6.
View the following non-configurable fields:
•
The Port Role specifies the 802.1AS role of the interface. The possible roles are as
follows:
•
Disabled (default)
•
Master
•
Slave
•
Passive
•
The Propagation Delay field shows the mean propagation delay on the interface.
•
The Measuring Pdelay field shows whether the interface is receiving PDELAY
response messages from other end of the link.
•
The 802.1AS Capable field shows whether the interface is 802.1AS capable or not.
By default, the interface is not 802.1AS Capable.
7.
Configure the Sync Interval. This value is the logarithm to the base 2 of the mean-time
interval between successive SYNC messages sent on this interface. The default value is –3.
The range is –5 to 5.
8.
Configure the Pdelay Interval. This value is the logarithm to the base 2 of the mean time
interval between successive PDELAY_REQ messages sent on this interface. The default
value is 0. The range is –5 to 5.
9.
Configure the Announce Interval. This value is the logarithm to the base 2 of the mean time
interval between successive ANNOUNCE messages sent on this interface. The default
value is 0. The range is –5 to 5.
10.
Configure the SyncRx Timeout. This value sets the number of SYNC intervals that have to
pass without receipt of SYNC information before considering that the master is no longer
transmitting. The default value is 3. The range is 2 to 255.
11.
Configure the AnnounceRx Timeout. This value sets the number of ANNOUNCE intervals
that have to pass without receipt of ANNOUNCE PDU before considering that the master is
no longer transmitting. The default value is 2. The range is 2 to 255.
12.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
13.
If you make any changes to the page, click
Apply
to retain the changes to the system.
14.
Click
Refresh
to reload the page and update it with the most current information.
