65
GS716T and GS724T Gigabit Smart Switches
LLDP Port Settings
Use the LLDP Port Settings page to specify LLDP parameters that are applied to a specific
interface.
To display the LLDP Port Settings page, click
System
LLDP
Advanced
LLDP Port
Settings
.
To configure LLDP port settings:
1.
Change the LLDP port settings described below:
•
Interface.
Specifies the port to be affected by these parameters.
•
Admin Status
. Select the status for transmitting and receiving LLDP packets:
•
Tx Only
: Enable only transmitting LLDP PDUs on the selected ports.
•
Rx Only
: Enable only receiving LLDP PDUs on the selected ports.
•
Tx and Rx
: Enable both transmitting and receiving LLDP PDUs on the selected
ports. This is the default value.
•
Disabled
: Do not transmit or receive LLDP PDUs on the selected ports.
•
Management IP Address.
Choose whether to advertise the management IP address
from the interface. The possible field values are:
•
Stop Advertise
: Do not advertise the management IP address from the interface.
•
Auto Advertise
: Advertise the current IP address of the device as the
management IP address.
•
Notification.
When notifications are enabled, LLDP interacts with the Trap Manager
to notify subscribers of remote data change statistics. The default is Disabled.
