58
GS716T and GS724T Gigabit Smart Switches
SNMP
From SNMP link under the System tab, you can configure SNMP settings for SNMP V1/V2
and SNMPv3.
From the SNMP link, you can access the following pages:
•
SNMPV1/V2
on page
58
•
Trap Flags
on page
61
•
SNMP v3 User Configuration
on page
62
SNMPV1/V2
The pages under the SNMPV1/V2 menu allow you to configure SNMP community
information, traps, and trap flags.
Community Configuration
To display this page, click
System
SNMP
SNMP V1/V2
Community Configuration
.
By default, two SNMP Communities exist:
•
Private, with Read/Write privileges and status set to
Enable
.
•
Public, with Read Only privileges and status set to
Enable
.
These are well-known communities. Use this page to change the defaults or to add other
communities. Only the communities that you define using this page will have access to the
switch using the SNMPv1 and SNMPv2c protocols. Only those communities with read/write
level access can be used to change the configuration using SNMP.
