292
GS716T and GS724T Gigabit Smart Switches
3.
In the Guest VLAN field for ports g1–g8, enter 150 to assign these ports to the guest VLAN.
You can configure additional settings to control access to the network through the ports.
See
Port Security Interface Configuration
on page
205 for information about the settings.
4.
Click
Apply
.
5.
From the 802.1X Configuration screen, set the Port Based Authentication State and Guest
VLAN Mode to Enable, and then click
Apply
(See
Port Security Configuration
on page
204).
This example uses the default values for the port authentication settings, but there are
several additional settings that you can configure. For example, the EAPOL Flood Mode
field allows you to enable the forwarding of EAPoL frames when 802.1X is disabled on
the device.
6.
From the RADIUS Server Configuration screen, configure a RADIUS server with the
following settings:
•
Server Address: 192.168.10.23
•
Secret Configured: Yes
•
Secret: secret123
•
Active: Primary
For more information, see
RADIUS Configuration
on page
175.
7.
Click
Add
.
8.
From the Authentication List screen, configure the default List to use RADIUS as the first
authentication method (See
Authentication List Configuration
on page
184).
This example enables 802.1X-based port security on the GS716T and GS724T switch and
prompts the hosts connected on ports g1–g8 for an 802.1X-based authentication. The switch
passes the authentication information to the configured RADIUS server.
