246
GS716T and GS724T Gigabit Smart Switches
Server Log Configuration
Use the Server Log Configuration page to allow the switch to send log messages to the
remote logging hosts configured on the system.
To access the Server Log Configuration page, click the
Monitoring
Logs
tab, and then click
the
Server Log
link.
To configure local log server settings:
1.
Use the radio buttons in the
Admin Status
field to determine whether to send log
messages to the remote syslog hosts configured on the switch.
•
Enable
: Messages will be sent to all configured hosts (syslog collectors or relays)
using the values configured for each host.
•
Disable
: Stops logging to all syslog hosts. Disable means no messages will be sent to
any collector/relay.
2.
In the Local UDP Port field, specify the port on the switch from which syslog messages are
sent.
3.
Click
Apply
to save the settings.
The Server Log Configuration area also displays the following information:
•
The
Messages Relayed
field shows the number of messages forwarded by the syslog
function to a syslog host. Messages forwarded to multiple hosts are counted once for
each host.
•
The
Messages Ignored
field shows the number of messages that were ignored.
