192
GS716T and GS724T Gigabit Smart Switches
Access Rule Configuration
Use the Access Rule Configuration page to configure the rules about what systems can
access the GS716T and GS724T Web interface and what protocols are allowed.
To access the Access Rule Configuration page, click
Security
Access
, and then click the
Access Control
Access Rule Configuration link.
Before you create access rules, make sure:
•
An access profile exists.
•
The access profile is deactivated.
To configure access profile rules:
1.
To add an access profile rule, configure the following settings and click
Add
.
•
Rule Type
: Specify whether the rule permits or denies access to the GS716T and
GS724T management interface.
•
Select
Permit
to allow access to the management interface for traffic that meets
the criteria you configure for the rule. Any traffic that does not meet the rules is
denied.
•
Select
Deny
to prohibit access to the management interface for traffic that meets
the criteria you configure for the rule. Any traffic that does not meet the rules is
allowed access to the switch. Unlike MAC ACLs and IP ACLs, there is no implied
deny all
rule at the end of the rule list.
•
Service Type
. Select the type of service to allow or prohibit from accessing the switch
management interface:
•
SNMP
•
HTTP
•
HTTPS
