242
GS716T and GS724T Gigabit Smart Switches
Memory Logs
The
in-memory
log stores messages in memory based upon the settings for message
component and severity. Use the Memory Logs page to set the administrative status and
behavior of logs in the system buffer. These log messages are cleared when the switch
reboots.
To access the Memory Log page, click the
Monitoring
Logs
tab, and then click the
Memory Log
link.
To configure the Memory Log settings:
1.
Use the radio buttons in the
Admin Status
field to determine whether to log messages.
•
Enable
: Enables system logging.
•
Disable
: Prevents the system from logging messages.
2.
From the
Behavior
menu, specify the behavior of the log when it is full.
•
Wrap
: When the buffer is full, the oldest log messages are deleted as the system logs
new messages.
•
Stop on Ful
l: When the buffer is full, the system stops logging new messages and
preserves all existing log messages.
3.
If you change the buffered log settings, click
Apply
to apply the changes to the system and
the changes will be saved.
