IAC3000
User’s Manual
95
y
Data Rate:
The default is
Auto
. Available range is from 1 to 54Mbps. The rate of data transmission
should be set depending on the speed of the wireless network. Select from a range of transmission
speed is desired or keep the default setting,
Auto
, to make the Access Point automatically use the
fastest rate possible.
y
Fragment Length:
Breaking a packet into smaller units when transmitting over a network medium that
cannot support the original size of the packet.
y
RTS Threshold:
Enter the desired RTS Threshold value, the range is from 0 to 2347, and the default is
2347.
y
Beacon Interval (ms):
Enter a value between 20 and 1000 msec. The default value is 100
milliseconds. The entered time means how often the beacon signal transmits between the access point
and the wireless network.
y
Preamble:
Select from either Short Preamble or Long Preamble; the short preamble provides 56 bits
Synchronization field to improve WLAN transmission efficiency.
y
Transmit Power:
Choose the suitable value from the drop-down box.
y
Wireless QoS WMM:
Enable or disable QoS and WMM. WMM maintains the priority of audio, video
and voice applications in a Wi-Fi network.
y
Wireless Client Isolation:
Enable or disable Client Isolation. Client Isolation prevents wireless
client to wireless client traffic.
y
IAPP:
Inter Access-Point Protocol is designed for the enforcement of unique association throughout a
ESS (Extended Service Set) and for secure exchange of station’s security context between current
access point (AP) and new AP during handoff period.
¾
Access Control:
In this function, when the status is
“Allowed”
, only these clients whose MAC addresses
are listed in this list can be allowed to connect to the AP; on the other hand, when the status is “Denied”,
the clients whose MAC addresses are listed in the list will be denied to connect to the AP. When
“Disabled”
is selected, all clients can connect to the AP. The default is
Disabled
.
o
User Limit:
Limit the number of users connected to that AP.
Summary of Contents for IAC3000
