NetComm IAC3000 User Manual Download Page 218

Page: 218 / 226

IAC3000

User’s Manual

214

Custom Pages >> Logout Page

The administrator can apply their own logout page in the menu. As the process is similar to that of the Login

Page, please refer to the “Login Page >> Uploaded Page” instructions for more details.

Note: The different part is the HTML code of the user-defined logout interface must include the following HTML

code that the user can enter the username and password. After the upload is completed, the customized logout

page can be previewed by clicking Preview at the bottom of this page. If restore to factory default setting is needed

for the logout interface, click the “Use Default Page” button.

Custom Pages >> Login Success Page

The users can apply their own Login Success page in the menu. As the process is similar to that of the Login

Page, please refer to the “Login Page” instructions for more details.

Summary of Contents for IAC3000



































































































































































































































Search results

Summary of Contents for IAC3000

Reviews:

Brands by name

Popular brands

NetComm IAC3000, User Manual

Search results

Summary of Contents for IAC3000

Reviews:

Brands by name

Popular brands