manualshive.com logo in svg

NetComm IAC3000, User Manual

Share
Download
NetComm IAC3000 User Manual Download Page 226

Product Warranty

NetComm products have a standard 12 months warranty from date of purchase. However some products have an extended 
warranty option, via registering your product online at the NetComm website 

www.netcomm.com.au

.

Technical Support

If you have any technical difficulties with your product, please refer to the support section of our website.

www.netcomm.com.au/support

Note:  NetComm Technical Support for this product only covers the basic installation and features outlined in the Quick Start Guide. For further information regarding the 

advanced features of this product, please refer to the configuring sections in the User Guide or contact a Network Specialist.

NETCOMM LIMITED

  PO Box 1200, Lane Cove NSW 2066 Australia

P:

 02 9424 2070  

F:

 02 9424 2010

E:

 [email protected]  

W:

 www.netcomm.com.au

DYNALINK NZ

  224b Bush Road, Albany, Auckland, New Zealand 

P:

 09 448 5548  

F:

 09 448 5549

E:

 [email protected]  

W:

 www.dynalink.co.nz

www.dynalink.co.nz

www.dynalink.co.nz

Trademarks and registered trademarks are the property of NetComm Limited or their respective owners.  

Specifications are subject to change without notice. Images shown may vary slightly from the actual product.

Summary of Contents for IAC3000



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands