NetComm IAC3000, User Manual

Page: 48 / 226

IAC3000
User Manual
44
4.2.1 Authentication Configuration
This section is for administrators to pre-configure authentication servers for the entire system's Service Zones. For
a particular Service Zone, administrators can enable all the authentication servers which will be used and also
specify a default authentication server in the page of Service Zone Settings . Concurrently up to four servers can be
selected and pre-configured here by administrators from the five types of authentication databases (LOCAL,
POP3, RADIUS, LDAP, and NTDOMAIN). In addition, there are two servers (On-demand User and SIP) that are
selected by the system. For the Authentication Settings of each Service Zone, please see 4.1.7 Service Zones .
y
Server Name: There are several authentication options supported by IAC3000: Server 1 to Server 4, On-
demand User, and SIP. Click the hyperlink of the respective Server Name to configure the authentication server.
y
Auth Method: There are different authentication methods in IAC3000: LOCAL , POP3 , RADIUS , LDAP,
NTDOMAIN , ONDEMAND and SIP .
y
Postfix: A postfix represents the authentication server in a complete username. For example, user1@local
means that this user (user1) will be authenticated against the LOCAL authentication database.
Note: Concurrently only one server is allowed to be set as LOCAL or NTDOMAIN authentication method.
y
Group: An authentication option, such as POP3 or NT Domain, can be set as a Group with the same QoS or
Privilege Profile setting.
For more information on Group, please refer to Section 4.2.3. Group Configuration.
Caution: After clicking Apply, there will be a restart message. You must click Restart to apply the settings.