manualshive.com logo in svg

NetComm IAC3000, User Manual

Share
Download
NetComm IAC3000 User Manual Download Page 118

IAC3000 

User’s Manual 

 

114

4.4.5 Proxy Server Properties 

IAC3000 supports Internal Proxy Server and External Proxy Server functions. 

 

 

 

y

 

External Proxy Server:

 Under the IAC3000 security management, the system will match the External Proxy 

Server list to the end-users’ proxy setting. If there isn’t a matching, then the end-users will 

not

 be able to reach 

the login page and thus unable to access the network. If there is a matching, then the end-users will be 

directed to the system first for authentication. After a successful authentication, the end-users will be redirected 

back to the desired proxy servers depending on various situations. 

y

 

Internal Proxy Server:

 IAC3000 has a built-in proxy server. If this function is enabled, the end users will be 

forced to treat IAC3000 as the proxy server regardless of the end-users’ original proxy settings. 

 

Summary of Contents for IAC3000



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands