IAC3000
User’s Manual
196
4)
Using DHCP:
If you want to use DHCP, choose
“Obtain an IP address automatically”
and click
OK
. This is also the default setting of Windows.
Then, reboot the PC to make sure an IP address
is obtained from IAC3000.
5)
Using Specific IP Address:
If you want to use a
specific IP address, acquire the following
information from the network administrator: the
IP
Address
,
Subnet Mask
and
DNS Server address
provided by your ISP and the
Gateway
address
of IAC3000.
Note: If your PC has been set up completed, please inform the network administrator before proceeding to the
following steps.
5.1) Choose
“Use the following IP address”
and enter the
IP address
,
Subnet mask
. If the DNS Server field
is empty, select
“Using the following DNS server addresses”
and enter the
DNS Server address
.
Then, click
OK
.
5.2) Click
Advanced
to enter the
Advanced TCP/IP Settings
window.
Summary of Contents for IAC3000
