IAC3000
User’s Manual
194
5) Using Specific IP Address:
If you want to use a specific IP address, acquire the following information
from the network administrator: the
IP Address
,
Subnet Mask
and
DNS Server address
provided by your
ISP and the
Gateway
address
of IAC3000.
Note: If your PC has been set up completed, please inform the network administrator before proceeding to the
following steps.
5.1) Choose
“Use the following IP address”
and
enter the
IP address
,
Subnet mask
. If the DNS
Server field is empty, select
“Using the
following DNS server addresses”
and enter
the
DNS Server address
. Then, click
OK
.
5.2) Click
Advanced
to enter the
Advanced
TCP/IP Settings
window.
5.3) Click on the
IP Settings
tab and click
Add
below the
“Default gateways”
column and
the
TCP/IP Gateway Address
window will
appear.
5.4) Enter the gateway address of IAC3000 in the
“Gateway”
field, and then click
Add
. After
back to the
IP Settings
tab, click
OK
to
complete the configuration.
Summary of Contents for IAC3000
