manualshive.com logo in svg

NetComm IAC3000, User Manual

Share
Download
NetComm IAC3000 User Manual Download Page 211

IAC3000 

User’s Manual 

207

 

 

 

2.  Limitations 

 

The limitation on the client side due to ActiveX and Windows OS includes: 

a 

Internet Connection Firewall of Windows XP or Windows XP SP1 is not compatible with IPSec protocol. It 

shall be turned off to allow IPSec packets to pass through. 

b 

Without patch, ICMP (Ping) and PORT command of FTP can not work in Windows XP SP2. 

c 

The forced termination (through CTRL+ALT+DEL, Task Manager) of the Internet Explorer will stop the 

running of ActiveX. It causes that IPSec tunnel cannot be cleared properly at client device. A reboot of 

client device is needed to clear the IPSec tunnel.   

d 

The crash of Windows Internet Explorer may cause the same result. 

 

3.  Internet Connection Firewall 

In Windows XP and Windows XP SP1, the Internet Connection Firewall is not compatible with IPSec. Internet 

Connection Firewall will drop packets from tunneling of IPSec VPN. 

 

Summary of Contents for IAC3000



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands