NetComm IAC3000, User Manual

Page: 112 / 226

IAC3000
User’s Manual
108
4.4.2 Privilege List
There are two parts, Privilege IP Address List and Privilege MAC Address List , which can be set.
y
Privilege IP Address List
If there are some workstations belonging to the managed server that need to access the network without
getting authenticated, enter the IP addresses of these workstations in this list. The “Remark” blank is not
necessary to be filled in but is useful in record-keeping. IAC3000 allows 100 privilege IP addresses at most.
These settings will become effective immediately after clicking Apply .
Warning: Permitting specific IP addresses to have network access rights without going through standard
authentication process at the controlled port may cause security problems.
y
Privilege MAC Address List
In addition to the IP address, the MAC address of the workstations that need to access the network without
getting authenticated can also be set in this list. IAC3000 allows 100 privilege MAC addresses at most.
It is possible to manually create the list by entering the MAC address (the format is xx:xx:xx:xx:xx:xx) as well as
entering the remark (not required). These settings will become effective immediately after clicking Apply .