manualshive.com logo in svg

NetComm IAC3000, User Manual

Share
Download
NetComm IAC3000 User Manual Download Page 33

IAC3000 

User Manual 

 

29

4.1.4 WAN2 Configuration 

Select

 None 

to disable this WAN2 interface, or there are 3 connection types for the WAN2 port: 

Static IP Address, 

Dynamic IP Address,

 and 

PPPoE Client

. 

 

 

 

y

 

None

: The WAN2 Port is disabled.  

y

 

Static IP Address:

 Manually specifying the IP address of the WAN port. The red asterisks indicate required 

fields to be filled in.

 

 

IP Address: 

the IP address of the WAN2 port.

 

Subnet Mask: 

the subnet mask of the network WAN2 port connects to.

 

Default Gateway: 

a gateway of the network WAN2 port connects to.

 

Preferred DNS Server: 

The primary DNS server is used by the system.

 

Alternate DNS Server: 

The substitute DNS server is used by the system. This is an optional field. 

y

 

Dynamic IP Address: 

It is only applicable for the network environment where a DHCP server is available. 

Click the

 Renew

 button to get an IP address.

 

 

Summary of Contents for IAC3000



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands