NetComm IAC3000, User Manual

Page: 103 / 226

IAC3000
User’s Manual
99
After scanning, new APs will be listed in the Discovered AP List . Click the desired names of
Service Zone for Tag-based mode. Add the selected AP to the list by checking the AP and clicking
Add button.
o
Tag-Based mode:
In Tag-based mode, the name of service zone has been selected in the Interface, such as Guest or
SZ1. Select Factory Default in the section of Admin Setting (Recommended). Then, start scanning
the new APs in the IP address by clicking Scan Now button.
After scanning, new APs will be listed in the Discovered AP List . Click the desired names of
Service Zone for tag-based mode. Add the selected AP to the list by checking the AP and clicking
Add button.