manualshive.com logo in svg

NetComm IAC3000, User Manual

Share
Download
NetComm IAC3000 User Manual Download Page 31

IAC3000 

User Manual 

 

27

4.1.3 WAN1 Configuration 

There are 4 methods of obtaining IP address for the WAN Port: 

Static IP Address

, 

Dynamic IP Address

, 

PPPoE 

and

 PPTP Client

. 

 

 

 

y

 

Static IP Address:

 Manually specifying the IP address of the WAN port. The red asterisks indicate required 

fields to be filled in.

 

 

IP address: 

the IP address of the WAN1 port.

 

Subnet mask: 

the subnet mask of the network WAN1 port connects to.

 

Default gateway: 

a gateway of the network WAN1 port connects to.

 

Preferred DNS Server: 

The primary DNS server is used by the system.

 

Alternate DNS Server: 

The substitute DNS server is used by the system. This is an optional field. 

 

y

 

Dynamic IP Address: 

It is only applicable for the network environment where the DHCP server is available on 

the network. Click the

 Renew

 button to get an IP address automatically.

 

 

Summary of Contents for IAC3000



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands