NetComm IAC3000, User Manual

Page: 105 / 226

IAC3000
User’s Manual
101
4.3.4 Template Settings
Template is a model that can be copied to every AP and not necessary to configure the AP individually. There are
three templates provided. Click Edit to go on configuration.
Before configure the template, copy the configuration mode of an AP to the template by selecting a Source AP ,
and without configuring the template from the beginning, administrators can also revise some settings for demand.
If copy is not desired, please select NONE . Input the Template Name and Template Remark and click the button
of Configure to go on configuration.
¾
Template Edit : Here is the section that administrators can configure template name, template source,
and template remark.
¾
Template Name : The name shown for this particular template will change according to what given by
administrators.
¾
Template Source: Select an existing AP and click Apply to save its settings as the template settings.
After entering the interface, revise the configuration for demand and change administrator’s password if desired.
About other function settings, please refer to 4.3.1 AP List .
y
Template Editing
The administrator can set the template configuration manually. Click Configure button to have detailed
configurations.