Installation and programming manual
Options and programming methods
85
1° line:
zone description
2° line:
zone status (“Standby”, “Alarm”, “Short”, “Tamper”), its activation status (“un-
bypassed” - capable of generating alarms, or “bypassed” - incapable of gen-
erating alarms)
3° line:
various indications depending on the device type:
-
wired zone; resistance value reading expressed Ohm
-
wireless zone; wireless signal reception level
-
level of smoke present in the smoke detection chamber of the Air2-FD100
smoke detector, expressed in mdB/m
4° line:
level of contamination present in the smoke detection chamber of Air2-FD100
smoke detector (%)
Note
It is advisable to clean the detector when the value exceeds 90%.
•
Faults
- allows you to view any current faults.
•
Panel version
- allows you to view the firmware version and model of the
SmartLiving control panel.
Outputs ON/OFF
Allows manual activation/deactivation of the outputs by means of keys
and
.
Set date/time
Allows you to set the date and time of the control panel.
1. Use keys
and
to select the programming field you wish to change (hour, min-
utes, etc.).
2. Use keys
and
to make any changes in the selected field.
3. Press
to save and exit.
Via PC
The SmartLeague software programme provides a section which, during a connection to
a SmartLiving control panel, allows you to monitor the entire system in real time and
access some of the above-mentioned parameters.
Select the
Check control panel, Monitoring
option from the menu bar.
A window containing various sections will open. The sections can be selected by means
of tags, each referring to a different part of the system.
6-27
Other parameters
This option allows you to programme the advanced functions of the control panel.
Via Keypad
1. Access the “Other parameters” section.
Type-in Code
(Installer PIN)
, PROGRAMMING Other parameters
.
2. Use keys
and
to select the parameter thenpress
:
Periodic Ev.
This options allows you to select one of the four periodic events and set the respective
parameters.
Table 56:
User functions - via SmartLeague software programme
Option
Part of the system
Section of the monitoring
window
Template/section
View/Log
SmartLiving System - Events log
Programming
View/Nexus status
Peripheral details - Sounder-
flashers, isolators and Nexus
Nexus
View/System status
Remote keypad
Control panel status
Power
Power supply parameters
View/Zone status
Zones
View/Faults present
Remote keypad
Control panel status
View/Control panel version
Window heading
Outputs ON/OFF
Zones
Outputs ON/OFF
Set date/time
SmartLiving System
SmartLiving System
Programming
