76
Options and programming methods
Inst.code2Access 2
Use keys
and
to enable/disable the sections of the installer menu the
secondary installer code can access.
Note
In this section, the secondary installer code can access Inst.CodePIN2 section only.
6-16
Keys
This section will allow you to programme the parameters of the digital keys and Air2-
KF100 wireless keyfobs (for details regarding the wireless keyfobs, refer to the Air2-
BS100 Transceiver Installation guide).
Via Keypad
Type-in Code
(Installer PIN)
, PROGRAMMING Keys
.
Enroll
Each digital key and wireless keyfob must be enrolled separately on the system in order
to allow it to operate. The
enrolling procedure is as follows.
1. View the readers in the control panel configuration. Select the reader
you wish to
use for the enrollment of the key/s, then press
. If you select a reader simu-
lated by the Air2-BS100, a “W” will be shown at the end of the description.
2. Select the digital key you wish to enroll and press
. If you are using an nBy/S
or nBy/X reader, all the LEDs will begin to blink to indicate that it is ready to
enroll the key.
3. The keypad will indicate the current description of the digital key concerned.
4. Hold the digital key in the vicinity of the reader and then move it away. For Air2-
KF100 wireless keyfobs, press contemporarily keys 3 and 4.
5. The keypad will emit a beep to confirm that the digital key has been successfully
enrolled. If you are using an nBy/S or nBy/X reader, the red LED will go On. The
digital key description will go to the next key automatically. This method (from
step 4.) allows you to enroll as many digital keys as the system requires.
6. Once you have completed the enrolling process, press
or
.
Note
All the enrolled keys will be enabled to operate the system immediately.
Key parameters
This section allows you to programme all the parameters of the selected digital key.
•
Description
- editable field for the name of the digital key user.
•
Partitions
- the partitions the digital key is assigned to and therefore can control.
•
Options
- activated by means of keys
and
, are:
•
Timers
- this section allows you to associate a timer with the digital key. The key
will be able to operate the system only when the associated timer is “On”.
•
Shortcuts -
this section allows you to programme up to 4 shortcuts (F1, F2, F3, F4)
for each key.
The shortcut associated with the key can be one of the following types:
•• None
•• Arm/disarm
•• Stop alarms
Readers
READER 001
READER 002
READER 003
PROGRAMMING
Codes
Installer Code
Keys
Keys
Enroll
Key parameters
Delete key
Table 50:
Key options
Option
If enabled
If disabled
Patrol
The digital key will be able to disarm specific parti-
tions for patrol purposes.
Maintenance
The digital key will be able to block alarm/tamper
outputs for the time that it is held in front of a
reader.
Use
keyShortcuts
If a digital key is held in the vicinity of a reader, only
the digital key shortcuts will be indicated, and not
the reader shortcuts.
If a digital key is held in the vicinity of a reader,
only the reader shortcuts will be indicated and, if
configured, the first shortcut programmed on the
digital key.
These options do
not apply to
Air2-KF100
wireless
keyfobs.
DisarmNotAllo
wed
If a digital key is held in the vicinity of a reader
when partitions are armed, the Disarm option will
be inhibited (all LEDs Off).
If a digital key is held in the vicinity of a reader
when partitions are armed, the Disarm option will
be allowed (all LEDs Off).
