46
Installation project via the SmartLeague
Chapter 5
INSTALLATION PROJECT
VIA THE SMARTLEAGUE
The especially designed SmartLiving system can be programmed from a keypad or via
PC. All programming functions can be accessed through the software programme. You
will need:
•
A computer (to be connected to the control panel)
•
The SmartLeague software programme
5-1
The SmartLeague
software programme
The SmartLeague software programme allows the installer to prepare the majority of
the parameters/settings without actually being connected to the control panel.
However, connection is required during the upload and download operations. The type
of connection depends on the method used for read/write operations to and from the
control panel:
•
RS232 serial port of the PC
•
LAN (combined with the use of a SmartLAN/SI or SmartLAN/G board)
•
Modem
The programming parameters of an installation constitute the “solution”. The solution
can be saved to the memory of the SmartLeague software programme, either for future
use or as a “model” for other installations.
The homepage of the SmartLeague software programme is common to all the
programmable devices and is always active, even during the programming session (in
the form of a template):
Table 40:
SmartLeague software programme - homepage
A
The menu bar, application icons and
programming accessories.
B
List of recent solutions - which will
allow you create new solutions or
open existing solutions
C
Documentation installed on the
computer.
D
Area dedicated to help and service
via Internet. It is possible to consult
FAQ page, make enquiries and
suggestions via e-mail.
E
Access to the area reserved for
registered users of the Ness website.
After typing in a Username and Pass-
word, you can access the updated
versions of the software programme,
firmware, technical documentation
and service.
C
A
D
E
B
