44
Installation
router. The router will update the dynamic IP address periodically with the registered
static hostname (for example, http://casamia.dyndns.org). In this way it will be
possible to have remote access to the router by means of a univocal name that is
linked to the public IP address.
•
Connection to a
static public IP address
This type of connection links to a public IP address that is always the same. In this
case, it is possible either to access the router directly through the fixed IP address,
or purchase a domain (for example, www.casamia.com) that is capable or re-routing
packets to the fixed IP address assigned by the connection provider.
Once remote access to the router has been achieved, it is necessary to route the
incoming connections to the SmartLAN. To distinguish these connections, use the
previously programmed “IP Address” and “Port” parameters. During this
programming phase, it is strongly recommended that you contact the network
administrator in order to avoid configuration conflicts.
It is therefore necessary to access the router page reserved for “port forwarding”
(sometimes called “virtual server”) and set up the route directions of the two services
the SmartLAN is enabled on.
•
Web server port
•• communication protocol: TCP/IP
•• external port: 8080 (or any other free port provided by the network
administrator)
•• internal port: 80 (or the one selected during the programming phase)
•• IP address: IP address of the SmartLAN
•
Web server SSL port
•• communication protocol: TCP/IP
•• external port: 443 (or any other free port provided by the network administrator)
•• internal port: 443 (or the one selected during the programming phase)
•• IP address: IP address of the SmartLAN
•
Programming port
•• communication protocol: TCP/IP
•• external port: 5004 (or the one selected during the programming phase)
•• internal port: 5004 (or the one selected during the programming phase)
•• IP address: IP address of the SmartLAN
3-11-3
Remote access
To establish external communication with the SmartLAN/G web server via browser
(Firefox, Opera, Internet Explorer, etc.), type in the configured public IP address of the
router followed by the number of the external forwarding port, as follows:
•
http://www.casamia.com:8080 (in the case of domain associated with static public IP)
•
http://casamia.dyndns.org:8080 (in the case of registration with dyndns.org with
dynamic public IP)
VIA SMARTLEAGUE
In order to allow remote communication with the SmartLAN, it is necessary to set the
configuration on the SmartLeague (IP address of the router and external rerouting port).
VIA MOBILE DEVICES
For remote access to the SmartLAN/G web server, type on the browser on your mobile
phone the public IP address of the configured router followed by the number of the SSL
web port, as follows:
•
http://www.casamia.com:443 (in the case of domain associated with static public IP)
•
http://casamia.dyndns.org:443 (in the case of registration with dyndns.org with
dynamic public IP)
3-11-4
Connection test
The SmartLiving control panel can carry out an IP network connection test by making
link connection attempts to a precise IP address.
The SmartLeague software programme will allow you to set the test parameters. These
parameters can be found in the “Programming - IP connection test parameters” section
relating to the “SmartLiving system”:
•
IP Address, Port - Address IPv4 and port where the connection attempts are to be
directed.
•
Interval - an intervening period (expressed in seconds) between the test
connections. If set at “0” the connection test will be disabled
•
Number of attempts - number of connection attempts made during each test
If the connection test is enabled and fails (i.e. the control panel is unable to achieve an
IP connection during the programmed number of attempts), the “IP conn. loss” event
will be generated.
