Configuring the System 4-19
4.
If the message “User Password Is Set” (or “Administrator
Password Is Set”) appears in the Security Menu, the
password has been set up successfully.
!
CAUTION
If the User Password Is Clear field (or
Administrator Password Is Clear) appears in the
Security Menu, the corresponding password
feature is disabled. (Your system is not password
protected.)
How to Disable Password Protection
1.
From the Security Menu, highlight the “Set User
Password” or “Set Administrator Password” field
(depending on which password you disable) and press
Enter
.
2.
Type your password in the Enter Current Password field,
then press
Enter
.
3.
Don’t type anything in the Enter New Password field —
just press
Enter
.
4.
Again, don’t type anything in the Confirm New Password
field — just press
Enter
.
If the message “User Password Is Clear” (or “Administrator
Password Is Clear”) appears in the Security Menu, the User
(or Administrator) password feature is disabled.
Clear User Password
This clears the user password.
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...