![background image](http://html1.mh-extra.com/html/nec/powermate-spb-wash/powermate-spb-wash_user-manual_4143717120.webp)
Installing Options 5-33
7.
Connect the device cables (See “Cabling Storage
Devices”).
8.
Replace the front panel (see “Replacing the Front Panel”).
9.
Replace the access cover (see “Replacing the Access
Cover”).
Installing a 5 1/4-Inch Device
Install an accessible device into the device slot as follows.
1.
Follow the preinstallation instructions that came with the
device, such as setting jumpers and switches.
Note:
If your 5 1/4-inch device comes with
drive rails, do not attach them. Remove any rails
attached. See the documentation that comes
with the device.
2.
Remove the access cover (see “Removing the Access
Cover”).
3.
Remove the device cage (see “Removing the
CD-ROM/DVD Drive”).
4.
Remove and label any cables that interfere with installing
the device.
5.
Remove the front panel (see “Removing the Front
Panel”).
6.
Remove the plastic blank panel. If you are installing a
hard drive, keep the panel handy.
7.
Use a screw driver to remove the metal slot cover by
carefully pressing it until it breaks away from the chassis.
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...