![background image](http://html1.mh-extra.com/html/nec/powermate-spb-wash/powermate-spb-wash_user-manual_4143717128.webp)
6-4 Solving System Problems
Does your system fail to recognize the
CD-ROM/DVD drive?
Your drive designation may be incorrect.
Solutions to Common Problems
See the following sections to match your problem area and
view the possible causes and solutions.
When trying to solve problems, you should note what the
system was doing when the problem occurred and what you
attempted to do to correct the problem. This information is
useful if you request assistance.
System Problems
Check the following list to match your problem and see the
possible cause and solution.
No power and power lamp not lit
Check that the power cable is plugged into the system
power socket. Check that the other end of the cable is
plugged into a live, properly grounded AC power outlet.
System does not boot and error message displayed
on screen
Run the Setup Utility. Check that the parameters are set
correctly, particularly if you just installed an option.
See Appendix D for a description of error messages.
System sounds continuous beeps
Turn the system off, wait at least five seconds, and turn the
system on. If the beeps continue, call your NEC CSD
dealer or NEC CSD Technical Support.
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...