4-12 Configuring the System
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Disabled
LBA Mode Control
This option specifies the IDE translation mode. LBA
causes Logical Block Addressing to be used in place of
Cylinders/Heads/Sectors. You can enable or disable this
option. This option cannot be changed when “Auto” is
selected.
!
CAUTION
Do not change the translation mode setting from
the option selected when the hard drive was
formatted. Changing the option after formatting
could result in corrupted data!
Transfer Mode
This option specifies the method for transferring data
between the hard drive and system memory. This option
cannot be changed when “Auto” is selected. The options
include:
Standard
FPIO 1
FPIO 2
FPIO 3
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...