Installing Options 5-25
Cabling an Accessible 5 1/4-Inch Device
1.
Connect the diskette drive signal cable connector to the
appropriate connector on the device as shown in the
following figure.
2.
Locate an available power connector.
3.
Connect the power cable to the power connector on the
device.
Connecting an accessible 5 1/4-inch device
A – Device Connector
B – Red Edge
C – Signal Cable
D – Power Cable
Installing Storage Devices
The following subsections describe how to install 3 1/2-inch
and 5 1/4-inch devices.
The installation procedures include:
removing the front panel
removing the CD-ROM/DVD drive
installing a 3 1/2-inch device
installing a 5 1/4-inch device
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...