NEC PowerMate SPB-Wash, User Manual

Page: 84 / 222

4-30 Configuring the System
The following table summarizes the system board jumper
settings.
System Board Jumper Settings
Function
Jumper
J8A1
Configuration
Normal Mode 1-2 Factory setting. Sets the system for
normal operation. The BIOS uses the
current configuration information and
passwords for booting.
Configure Mode 2-3 Allows system configuration. After
POST, Setup runs automatically. The
Maintenance menu appears for setting
configuration parameters (including
processor speed and password
settings).
Recovery Mode None Enables BIOS recovery procedures.
BIOS attempts to recover the BIOS
configuration. A recovery diskette is
required (downloaded from the NEC
CSD website).
Clearing Your Password
The following sections describe how to clear your password.
1.
Turn off the power and unplug the system and any
peripherals.
!
WARNING
Turn off the system before you change any
jumper settings.
2.
Remove the access cover (see “Removing the Access
Cover” in Chapter 5).