![background image](http://html1.mh-extra.com/html/nec/powermate-spb-wash/powermate-spb-wash_user-manual_4143717135.webp)
Solving System Problems 6-11
If your system requires repair service from NEC CSD, call to
request repair service in the United States and Canada, call
1-888-632-2678
.
Battery Replacement
All system boards use a battery to maintain system
configuration information. Your system uses a coin-sized
battery mounted on the system board (see the following
figure). If it fails to maintain system configuration
information, replace it with an identically rated battery from
the same manufacturer.
The battery type is a Renata or compatible 3V Lithium CR
2032.
!
CAUTION
Removing the battery from the system board
causes the computer to lose system
configuration information. Before removing the
battery, run the Setup Utility and print out or write
down your system configuration settings. Then
you can restore your system to its previous
settings.
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...