Understanding System Features 3-5
Information on how to use the Flash utility is provided in
Chapter 4, Configuring the System.
Plug and Play
The BIOS is Plug and Play. It automatically configures both
PCI and Plug and Play devices. This autoconfiguration
feature allows you to insert or remove a PCI or Plug and Play
ISA add-in card and power up your computer without
complicated setting changes. The system automatically
configures interrupts, I/O space, and other parameters. Any
interrupts set to “Available” in the system Setup can be used
by the Plug and Play board.
Graphics and Multimedia Features
The system provides the following multimedia features.
Accelerated Graphics Port (AGP) Interface
The Intel 82440BX PCI/AGP Controller(PAC) supports
3.3 V AGP devices
processor host bus frequency of 100 MHz and 66 MHz
symmetrical and asymmetrical DRAM addressing
concurrent host, AGP, and PCI transactions to main
memory
System Management Mode (SMM).
Video Support
Your system comes with an Accelerated Graphics Port video
board installed. For more information about your video
board, see its documentation.
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...