B-14 System Specifications
Power Supply
The input voltage is selectable from a switch on the switching
power supply.
Input Requirements
Voltage (VAC)
Range (VRMS)
Current (ACMS)
115
90 to 132
6.0
230
180 to 264
4.0
This equipment has a 3-wire, grounded power cord. To
prevent electrical hazards, do not remove or defeat the ground
prong on the power cord if it gets damaged. Contact your
dealer or Authorized Service Provider for a replacement.
In the U.S.A. and Canada, the power cord must be a
UL-listed detachable power cord (in Canada, CSA-certified),
type SV or SVT, 18 AWG, 3-conductor, provided with a
molded-on NEMA type 5-15 P plug cap at one end and a
molded-on cord connector body at the other end. The cord
length must not exceed 15 feet (4.5 meters).
Outside the U.S.A. and Canada, the plug must be rated for
250 VAC, 10 amp minimum, and must display an
international agency approval marking. The cord must be
suitable for use in the end-user country. Consult your dealer
or the local electrical authorities if you are unsure of the type
of power cord to use in your country.
Summary of Contents for PowerMate SPB-Wash
Page 55: ...4 Configuring the System System BIOS and the Setup Utility BIOS Flash Utility Video Drivers...
Page 161: ...B System Specifications Standard Features Environmental Specifications...
Page 177: ...C System Board Connectors and Error Messages System Board Connectors Error Messages Beep Codes...
Page 220: ...Index 5 Z Zip drive release button data lamp 1 14 using 1 13...