Assembly Instructions for ProRak Series Workstations
Part List
1.
Legs
x4
2.
Span Braces
2 long (back span), 2 short (sides)
3.
Wing nut
x8
4.
Complimentary 10-32 rack screws
x8
Instructions:
1.
Start by removing the outer packaging. Begin and complete the assembly with the
unit resting in the base of the packaging.
2.
Simply screw the numbered
legs
onto the matching numbered
mounting plate
attached to the underside of the workstation.
3.
Attach the
span braces
to the pre-positioned
brackets
on the
legs
using the
wing
nuts
.
4.
Lift your workstation onto its
legs
and remove the remainder of the packaging. You
are ready to load your gear.
1507 S. Olive St. South Bend, In. 46619
