NEC NEAX 2000 IVS, Command Manual

Page: 380 / 473

ND-45669 (E) CHAPTER 3
Page 337
Revision 2.0
CMD5
COMMAND CODE
TITLE:
ID CODE ASSIGNMENT WITH AP
D5
Note 1:
According to the digits to be designated, assign 01FF to the 1st Data 0 and 1 respectively. Digits
18 corresponding to Bits 07 shown below.
Note 2:
When providing a Check Code, the maximum number of ID Code digits available is 8. The Check
Code is displayed on the CAT/MAT in addition to the ID Code entered.
Note 3:
The ID Code shall be registered previously at CMD5 Y = 3.
3 ID Code Entry X
XX
X......X
Max.
10 digits
Note 2
ID Code which is to be
dialed in service.
(Exclusive of Check
Code) ABBCC
DDEE
Setting of Temporary
Service Class
A: Type of Temporary
Service Class
0: Unrestricted
1: Fully-Restricted
2: Temporary Ser-
vice Class
9: Delete of the ID
Code
B-E:
Temporary
Service Class
(In case of A=2)
B: Trunk Restriction
Class (01-08)
C: Service Feature
Class-A (00-15)
D: Service Feature
Class-B (00-15)
E: Service Feature
Class-C (00-15)
A Station Number setting
corresponding to ID code
XX...X
Max.
10 digits
ID code
Note 3
X-XXXX Station Number
Y 1ST DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
~
ID CODE
DATA (00 FF)
x
1
x
2
x
3
x
4
x
6
x
7
x
8
b
0
b
7
0/1: Not to be totalled/To be totalled
x
5