NEC NEAX 2000 IVS, Command Manual

Page: 127 / 473

CHAPTER 3 ND-45669 (E)
Page 104
Revision 2.0
CM13
COMMAND CODE
TITLE:
STATION CLASS-2
13
MAT
1. FUNCTION:
The features for each station are to be designated by assigning Station Class-2 for each station number.
2. PRECAUTION:
(1) When assigning Station Class-2 to a Multiline Terminal by this command, enter “X-XXXX (Pri-
mary Extension Number)” of FX-FXXXX, which is assigned by CM10, as the first data.
(2) When a station has been set as an analog data station (YY=07), the following limitations are
applied to that station:
• Periodic Time Indication tone is not given to the line.
• Override by other stations is restricted.
• Camp-on is restricted.
• Ringing interval is fixed to 1 sec. ON-2 sec. OFF.
(3) This command is included in MAT mode menu “A1” (Station number & Class [COM01]).
(4) The data for a Single Line Station Number, Primary Extension Number of a Multiline Terminal,
Virtual-Line Station Number and Data Station Number are in the following table.
×
: To assign
–: Not assigned
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 21 22 28 29 32 33 34 35
Single line station number
(Assigned by CM10)
× × × × × × × × × × ×
–
× × × × × ×
–
×
– – – –
Primary Extension num-
ber of Multiline Terminal
(Assigned by CM10)
× × × × × × × × ×
–
×
–
× × × × ×
–
× × × × × ×
Virtual-line Station Num-
ber of Multiline Terminal
(Assigned by CM11)
– – – – –
× ×
– – –
× × × × × × ×
– –
×
– – – –
Data Station Number
(Assigned by CM1A)
– – – – –
× ×
– – – – – – –
× ×
– – – – – – – –
YY
STATION
NUMBER
[CM13] Station Class-2