NEC NEAX 2000 IVS, Command Manual

Page: 119 / 473

CHAPTER 3 ND-45669 (E)
Page 96 Addendum-001
Revision 2.1 AUGUST, 1998
CM11
COMMAND CODE
TITLE:
VIRTUAL-LINE NUMBER
11
MAT
4. DATA TABLE:
1. FUNCTION:
This command is used to assign station numbers, Intercom numbers, Loop Line numbers and ICI/OPR
Line numbers (for a Multiline Terminal Attendant Position), to Virtual-Lines assigned on a Multiline
Terminal.
2. PRECAUTION:
(1) The Virtual-Line station numbers must be different from station numbers assigned by CM10.
(2) The virtual LENs (Line Equipment Numbers) have no relationship with the LENs used in CM10.
Therefore, any virtual LENs can be assigned to each Virtual-Line station number.
(3) The following station data can be assigned to the Virtual-Line station numbers:
• Station Class-1 (CM12)
• Station Class-2 (CM13)
• Call Pickup Group (CM16)
(4) This command is included in MAT mode menu “A1” (Station number & Class [COM01]).
3. ASSIGNMENT PROCEDURE:
VIRTUAL
LEN
VIRTUAL-LINE NUMBER
RELATED
COMMAND
0000
0255
X
XXXX
Station Number (1-4 digits)
X = 0-9, A(*), B(#)
Note:
The total of multiline terminal numbers and virtual
station numbers can only equal 512, maximum.
CM20
CM90
A000
A031
A100
A131
Automatic Intercom Number (Refer to
Note 1
) CM12 YY = 03
CM56 YY = 10
CM90
ST DE + 11 + + + DE
(4 digits)
Virtual
+ + EXE
(1–4 digits)
VIRTUAL-LINE
NUMBER LEN
(4 digits)
INTERCOM
NUMBER
~ ~
~
~
XX
Automatic Intercom Group No.
(00-31)
AX
0/1 to be made one pair
[CM11] Virtual-Line Number