NEC NEAX 2000 IVS, Command Manual

Page: 338 / 473

ND-45669 (E) CHAPTER 3
Page 301
Revision 2.0
CM93
COMMAND CODE
TITLE:
PRIME LINE
93
MAT
4. DATA TABLE:
Note: Any station number or Virtual Line number can be assigned to the Prime Line.
A single-line telephone cannot be assigned as the Prime Line.
1. FUNCTION:
This command is used to assign the prime line to a station line or a trunk line on a Multiline Terminal.
The prime line is the line seized when the Multiline Terminal user goes off-hook or presses the speaker
button.
2. PRECAUTION:
(1) Any one station line or trunk line provided on the Multiline Terminal can be assigned as Prime
Line.
(2) This command is included in MAT mode menu “A2” [D
term
Key [COM01]).
3. ASSIGNMENT PROCEDURE:
MY LINE NUMBER
SETTING DATA
RELATED
COMMAND
DATA MEANING
X
XXXX
X
XXXX
Station Number/Virtual Line Number
Note
CM10, CM11
D000
D255
Trunk Number CM30 YY = 02, 03, 18
ST
PRIMARY
DE + 93 + + + DE NUMBER
STATION
+ + EXE
EXTENSION
NUMBER
(1 – 4 digits)
(1 - 4 digits)
NUMBER
TRUNK
(1 - 4 digits)
~ ~
~
[CM93] Prime Line