NEC NEAX 2000 IVS, Command Manual

Page: 109 / 473

CHAPTER 3 ND-45669 (E)
Page 86
Revision 2.0
CM08
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
405 Consecutive Speed Dialing when making an ISDN call. 0
1 Available
Not available
424 Method of charging a transferred call (for use with CP03
(MP) only) 0
1
Charging to the transferring station or
the transfer destination station.
Split charging to both the transferring
station and transfer destination station.
425 Charging to the transfer destination station or the transferring
station (for use with CP03 (MP) only) 0
1 Charging to the transferring station.
Charging to the transfer destination
station.
Shown below are stations to which call charging is to be made in the case of various transfer patterns.
426 SMDR for incoming call if the account code is not entered
(for use with CP03 (MP) only)
Note:
When this data is assigned to 1, SMDR for incom-
ing call is not provided even if CM13YY=05 and
CM35 YY=49 is 0 (To be provided).
0
1 To provide
Not provided
427 Sending additional DTMF signals when called station an-
swers, if assigning station additional DTMF signals
to One-Touch key on a Multiline Terminal 0
1 To send
Not sent
428 VMS transfer from ATTCON, if Camp-On is set and not an-
swered 0
1 To provide
Not provided
430 Sending out of Calling Party Subaddress to an ISDN network
when making a call from an ISDN Terminal 0
1
To send
(Depend on CM08-431)
Not sent
431 Assignment of Calling Party Subaddress to an ISDN network
when making a call from an ISDN Terminal 0
1
ISDN Circuit Station No. assigned by
CM10
ISDN Terminal No.
:
Initial Data
BASIC SERVICE FEATURE SETTING DATA
Transfer Patterns
CM08-424=1 CM08-424=0
CM08-425=1 CM08-424=0
CM08-425=0
Call transfer from STA A to
STA B Split charging to
STA A and STA B
STA B STA A
Call transfer from a station
(STA) to ATTCON STA STA STA
Call transfer from ATTCON
to a station (STA) STA STA STA
Call transfer from ATTCON
A to ATTCON B Split charging to
ATTCON A and
ATTCON B
ATTCON B ATTCON A