CHAPTER 3
ND-45669 (E)
Page 62
Addendum-002
Revision 2.2
JANUARY, 1999
CM00
COMMAND CODE
TITLE:
SYSTEM DATA MEMORY ALL CLEAR
00
[CM00]
System Data Memory All Clear
4.
DATA TABLE:
1.
FUNCTION:
This command confirms that the system data memory (RAM) area can be Written-in /Read-out and also
assigns the Initial Data to the RAM area.
2.
PRECAUTION:
(1)
This command can only be used in off-line mode.
(2)
When this command is executed, “OK” displays with Memory Clear completed (about 30 seconds
later).
(3)
If an error exists in memory, “WD ERROR” displays.
(4)
This command is not available with a CAT. To clear all system data, set SW3 to “B”, and press SW1
on the MP card. In this case, the only functional port is LEN0000, which is assigned as a CAT.
3.
ASSIGNMENT PROCEDURE:
1ST DATA
2ND DATA
DATA
MEANING
DATA
MEANING
1
System data memory all clear
CCC
Clear
3
System data clear for new memory area
Note:
This data is available when using
PN-CP00-C/CP02-C/CP03-C card.
CCC
Clear
+ 00 +
+
+
+
+
CCC
MEMORY AREA
EXE
ST
DE
DE
DESIGNATION
(1/3)
Summary of Contents for NEAX 2000 IVS
Page 1: ...ND 45669 E ISSUE 2 PART OF STOCK 151901 Command Manual DECEMBER 1997 NECAmerica Inc ...
Page 17: ...CHAPTER 1 ND 45669 E Page 2 Revision 2 0 This page is for your notes ...
Page 77: ...CHAPTER 2 ND 45669 E Page 60 Revision 2 0 This page is for your notes ...
Page 473: ...CHAPTER 4 ND 45669 E Page 430 Revision 2 0 This page is for your notes ...