NEC NEAX 2000 IVS, Command Manual

Page: 269 / 473

CHAPTER 3 ND-45669 (E)
Page 232
Revision 2.0
CM60
COMMAND CODE
TITLE:
ATT GROUP, FUNCTIONS
60
MAT
4. DATA TABLE:
1. FUNCTION:
This command is used to assign a number to an ATTCON for access on a tenant basis, and define the
consoles’ night switching ability, off-hook ringing, tone ringer, password code for Attendant Lockout
and Attendant Programming.
2. PRECAUTION:
(1) CM60 YY = 00, 01, 02, 04, 06 require a system reset after data setting.
(2) The password for ATTCON (YY = 30) cannot be assigned by the MAT mode menu.
(3) When assigning a password code for an ATTCON by CM60 YY = 30, the Function Number (0/1)
is required as the first data. The purpose of Function Numbers is shown below.
0: To assign a password for ATTCON Lockout
1: To assign a password for Attendant Programming
(DISA, System Speed Dialing, Date and Time, and Tone Ringer)
(4) This command is included in MAT mode menu “C2” (ATT Group, Functions [COM02]).
3. ASSIGNMENT PROCEDURE:
:
Initial Data
YY GROUP NUMBER
RELATED
COMMAND
No. MEANING DATA MEANING
00
(
Group
No.
)
ATT GROUP 0
1
2
3 ATT GROUP 0
ATT GROUP 1
ATT GROUP 2
ATT GROUP 3 CM62
CM51 YY = 13
01
(
Master
)
Designation of Master ATT
within ATT Group 0
1 Master ATT
Not Master ATT
Note: Master ATT must be
assigned to a single
ATTCON within
ATT Group.
ST DE + 60YY + + + DE
(1 - 8 digits)
DATA
+ + EXE
ATTCON
NUMBER
(0 - 7)
FUNCTION
NUMBER
(0/1)
INITIAL
INITIAL
[CM60] ATT Group, Functions