NEC NEAX 2000 IVS, Command Manual

Page: 432 / 473

ND-45669 (E) CHAPTER 3
Page 389
Revision 2.0
CMD001
COMMAND CODE
TITLE:
SYSTEM FEATURES (2)
D001
Note: Port 3 cannot be used for the PMS (IMS format).
Table 3-4 Quick Reference Data Table for PMS (IMS Format)
: Initial Data
1ST DATA
MEANING
2ND
DATA
MEANING
PORT 0 PORT 1 PORT 2 PORT 3
20 24 28 – Data speed 2/3/4/5 1200/2400/
4800/9600 bps
21 25 29 – Stop bit length 0 /1/2 1/1.5/2 bits
22 26 30 – Data length 0 /1 7/8 bits
23 27 31 – Parity 0 /1/2 None Parity/Even
Parity/Odd Parity
80 100 120 – Function 4 PMS
81 101 121 – Priority for data processing 0 1st priority
82 102 122 – Message Format 6 PMS format
(IMS format)
83 103 123 – Number of lines per page 0 Not used
84 104 124 – Protocol 6 IMS procedure
85 105 125 – Station Address (SA) 49 1
86 106 126 – Unit Address (UA) 33 !
87 107 127 – Timer for detecting terminal/no answer 8 1 sec.
89 109 129 – Timer for detecting the end of block 70 35 sec.
90 110 130 – Timer for detecting non data communication 70 35 sec.
91 111 131 – Number of times to resend the Selecting
Sequence when NAK is returned in Phase 2 3 3 times
92 112 132 – Number of times to resend the Selecting
Sequence when no answer in Phase 2 15 15 times
93 113 133 – Number of times to resend the Selecting
Sequence when NAK is returned in Phase 3 3 3 times
94 114 134 – Number of times to resend the Selecting
Sequence when no answer in Phase 3 32 15 times
95 115 135 – Delay before resending the Selecting
Sequence when NAK is returned 24 3 sec.
96 116 136 – Delay before resending the text when WABT is
returned 24 3 sec.
98 118 138 – Guard timer between texts 0 Not used