NEC NEAX 2000 IVS, Command Manual

Page: 259 / 473

CHAPTER 3 ND-45669 (E)
Page 222
Revision 2.0
CM52
COMMAND CODE
TITLE:
HOT LINE
52
MAT
1. FUNCTION:
This command is used to assign a Hot Line to stations, ATTCONs and trunks.
2. PRECAUTION:
(1) The maximum number of Hot Lines is 100, and the connection is one way from the calling side to
the called side. Thus, for connection in the opposite direction, the calling and called side must be
assigned to another Hot Line number. If all the Hot Lines are to be made bothway lines, the maxi-
mum number of Hot Lines is 50.
(2) The Station Number to be assigned as the Calling Station Number must be set as “Hot Line” via
CM12 YY = 03.
(3) If Hot Line-Outside is assigned by this command, data assignment via CM71 and CM72 are
required.
(4) This command is included in MAT mode menu “A6” (Hot Line [COM01]).
3. ASSIGNMENT PROCEDURE:
CALLING SIDE/
ST + 52YY + DE + CALLED SIDE + DE + + EXE
(1 digit)
DATA
(1 - 4 digits)
[CM52] Hot Line