NEC NEAX 2000 IVS, Command Manual

Page: 281 / 473

CHAPTER 3 ND-45669 (E)
Page 244
Revision 2.0
CM73
COMMAND CODE
TITLE:
MEMORY ALLOCATION FOR STATION SPEED DIALING
73
MAT
4. DATA TABLE:
Note 1:
If 1000-Slot Memory Block number “4” is chosen, then the 10-Slot Memory Block number range
is “00” to “49” (see the figure below).
Note 2:
If one of the 1000-Slot Memory Blocks is used for System Speed Dialing (indicated with CM08-
110, 111, 112, or 176), it cannot also be used for Station Speed Dialing.
Note 3: A
n entry of “342106” would allocate six (6) 10-Slot Memory Blocks, which would accommodate
sixty (60) Station Speed Dial numbers. 1000-Slot Memory Block number 3 would be used, start-
ing at 10-Slot Memory Block number 42, and ending at 10-Slot Memory Block number 47. Pro-
gramming facility would not be allowed.
1. FUNCTION:
This command is used to allocate memory areas for Station Speed Dialing to individual stations.
2. PRECAUTION:
(1) The allowed number of 10-Slots Memory Blocks per Station Number ranges from 1 to 10.
(2) This command is included in the MAT mode menu “E11” (Speed Dialing [COM02]).
3. ASSIGNMENT PROCEDURE:
KIND OF CALLING PARTY SETTING DATA
No. MEANING MEANING MEANING
X
XXXX
Station Number which
performs Station Speed
Dialing XXXXXX
Note 1 through Note 5
ST
STATION
DE + 73 + + + DE
(6 digits)
DATA
+ + EXE
NUMBER
(1 – 4 digits)
~
Number of 10-Slot
Memory Blocks (01-10)
XX X XX X
Facility for programming the
dialed number from the station
(0/1 = Allowed/Not Allowed)
The first 10-Slot Memory
Block number (00-99)
The 1000-slots memory
Block number (0-4, 8-F)
[CM73] Memory Allocation for Station Speed Dialing