ND-45669 (E)
CHAPTER 2
Page 7
Revision 2.0
INFORMATION FOR DATA PROGRAMMING
2.2 CAT Operation
When setting the office data, it is necessary to enter the following three kinds of data:
•
Command Code
•
First Data
•
Second Data
An explanation of the data entry procedure follows:
(a) Operation for confirming the existing office data
With the above entry completed, the present second data is displayed on the LCD.
If the second data is not assigned yet, either the initial data value or “NONE” is displayed.
(b) Operation for assigning (changing) the office data
With EXE pressed, "OK" is displayed on the LCD.
To confirm the data assigned, depress DE after entering the first data.
(c) Use of
button and
button
•
If
is pressed after setting the second data (after
has been pressed), the next first data
is displayed.
•
If
is pressed after setting the second data (after
has been pressed), the last data is dis-
played.
+ Command Code +
+ First Data +
ST
DE
DE
+ Command Code +
+ First Data +
+ Second Data +
+
ST
DE
DE
DE
EXE
S
–
S
EXE
–
EXE
Summary of Contents for NEAX 2000 IVS
Page 1: ...ND 45669 E ISSUE 2 PART OF STOCK 151901 Command Manual DECEMBER 1997 NECAmerica Inc ...
Page 17: ...CHAPTER 1 ND 45669 E Page 2 Revision 2 0 This page is for your notes ...
Page 77: ...CHAPTER 2 ND 45669 E Page 60 Revision 2 0 This page is for your notes ...
Page 473: ...CHAPTER 4 ND 45669 E Page 430 Revision 2 0 This page is for your notes ...
